Elpro Technologies 105U-G Spécifications télécharger pdf (Page 27)

GreenMatic I Lundeager 24 I 2791 Dragør I Tel. 7020 4840 I Fax 7020 4847 I www.greenmatic.dk

105-905G_ModbusTCP

0508

©ELPRO Technologies Pty Ltd

Page 1 of 12 app_905U-G_ModbusTCP_1.2.doc

PURPOSE

The purpose of this document is to provide the reader with an application note for setting up

an OPCServer, (KEPServer Enterprise) communicating Modbus TCP with an Elpro

105/905U-G-ET1 gateway.

This application should be read in conjunction with user manuals for details on powering and

programming 105/905U-G. The reader would also have a firm understanding of the Modbus

TCP protocol and programming the KEPWares KEPServer OPC Server.

MATERIALS

Kepware KEPServer OPC Server Software,

105/905U-G-ET1,

E-Series Configuration utility,

RS232 DB9 serial cable,

RJ45 Ethernet cables and Network Hub (depending on connection crossover cables may be

needed)

105/905U-G CONFIGURATION

Under Ethernet Settings the modules IP address needs to be set. If going through a network

then this address will need to be entered also under Gateway address. Ensure the Enable

Ethernet/IP checkbox has been Disabled and Enable Modbus Server has been enabled.

ELPRO Technologies Pty Ltd

Application Note: 105/905U-G-ET1 Modbus TCP & OPC Server

app_105/905U-G_ModbusTCP_1.2.doc

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Pas de commentaire

Elpro Technologies 105U-G Spécifications Page 27