Elpro Technologies 105U-G Spécifications télécharger pdf (Page 39)

GreenMatic I Lundeager 24 I 2791 Dragør I Tel. 7020 4840 I Fax 7020 4847 I www.greenmatic.dk

105U-G-PR2_Proﬁ bus

0508

©ELPRO Technologies Pty Ltd

Page 1 of 13 app_105U-G_EIP_1.2.doc

PURPOSE

The purpose of this document is to provide the reader with an application note for using the 105U-

G-PR2 Profibus DP Master Gateway with a Siemens ET200 S Distributed I/O system.

This application should be read in conjunction with user manuals for details on powering and

programming 105U-G. The reader would also have a firm understanding of the Profibus DP

protocol.

MATERIALS

The materials used for this application were,

Siemens ET200S Distributed I/O,

105U-G-PR2,

GSD File for ET200S,

E-Series Configuration utility (build 1.78 or higher),

RS232 DB9 serial cable (straight through pins 3 & 8),

105U-G CONFIGURATION

The Profibus Master configuration is done is two parts. Profibus Network Configuration and

Filedbus Mappings.

The Profibus Network configuration

sets the links between the Profibus

Slave Devices and the Profibus

Master Gateway. The Fieldbus

Mappings links the Profibus Data to

the radio network.

First you need to load the Profibus

Slaves GSD file into the E-Series

Configuration. Once configuration

software has been opened and a

Profibus Master Gateway has been

created, select the Profibus Network

configuraiton then Select “Install

GSD File” from the drop down File

menu and find the GSD file that

ELPRO Technologies Pty Ltd

Application Note: 105U-G-PR2 Profibus Master & Siemens ET200S Distributed I/O

app_105U-G_EIP_1.2.doc

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 65 66

Pas de commentaire

Elpro Technologies 105U-G Spécifications Page 39